Preparing your PC
Before you install RowPro, make sure your PC meets the minimum PC spec for RowPro and you have the latest Windows Service Pack installed.
Insert the Concept2 CD or RowPro CD in your PC. The Setup program should start automatically. If not, run RowProSetup.exe.
Click the RowPro icon on your desktop to start RowPro.
Get a free 20-day Tryout Key
When the Activation Manager appears:
|•||Click the Tryout tab and follow the steps there.|
|•||If your PC is connected to the Internet, click Get a free Tryout Key Online and wait a moment for RowPro to start.|
|•||If your PC is not connected to the Internet, click the Other ways to get a free Tryout Key link and follow the steps there.|
Add a user
When the In-Row Display appears, click the Control Center button above the 3D display. Click Users and follow the steps to add a user.
Connect your PM
To row with RowPro, connect the USB cable supplied with your Concept2 Performance Monitor (PM). Confirm that the light on the bottom left of the PM twin frame in RowPro is green.
Pull the handle on your Indoor Rower to start a Just Row.
|•||Your PM will record your rowing.|
|•||The PM twin will track your PM.|
|•||The 3D rower will move and will synchronize after a few strokes.|
To row a Set Piece for example, click the Session Setup menu button.
|•||Check the correct user is shown.|
|•||Select a session and click Row.|
There are troubleshooting guides:
|•||In the Installation and Evaluation Guide on the PC Software for your PM CD.|
If you need assistance, contact Digital Rowing at firstname.lastname@example.org
To buy RowPro, visit the Online Store at www.digitalrowing.com
Start RowPro. When the Activation Manager appears:
|•||If your PC is connected to the Internet, click the Activate Online button. Enter your email and Password and click Activate Now! Click OK and wait a moment for RowPro to start.|
|•||If your PC is not connected to the Internet, click the Other ways to activate RowPro link and follow the steps there.|